Ecological remedies against moulds

muffaPonteThe mold, and we have repeatedly talked about, It is a problem that occurs very frequently in domestic environments particularly moist and slightly ventilated.

Occurs mostly in bathrooms, in bedrooms, in kitchens, in the cubby holes, laundry and ironing service premises or where, a thermal bridge important, It facilitates the istaurarsi condensation; then in the window and door jambs, in the cooler north-facing walls or in the high corners insisting usually adjacent to curbs and pillars reinforced concrete (usually very cold).

For the prevention, In addition to often change the room air ’ (by opening the Windows), You should always avoid excessive build-up of production and steam especially in bathrooms and kitchens.
The ideal would ’ then ventilate during and after cooking and after a shower or a warm bath. But we know that this care is not always possible (and often not even simply).

And’ then in common use to remove mold after it has already long established on our walls; to do this, It is essential to avoid bleach, that is very pollutant, irritating to respiratory system and, especially, deleteria in quanto facilita il ricrearsi di altri focolai di mold ancora più energici ed aggressivi.

To work around this problem you could use some natural remedies, remedies that do not permanently eliminate the ’ infestation, then, for a serious and long-lasting care, the ’ only remedy would be to go to solve the real cause of the problem is to eliminate the superficial water stagnation ’ made from condensate (I will tell you at the end how to make paragraph 8).

Meanwhile here are some ‘ recipes’ useful to prepare themselves to fight this plague fungus.

1) Mould all peroxide ’

700 ml water
2 tablespoons of hydrogen peroxide to the 3%
2 tablespoons baking soda
2 tablespoons Salt up

To prepare this mould, dissolve the salt and baking soda in ’ lukewarm or warm water and add the ’ hydrogen peroxide. Pour all in one spray that has the ability to at least 1 liter. Shake well before use ’.
Spray the surfaces to be treated and use an old toothbrush to reach more difficult spots.
The solution is virtually odorless and has a good efficacy against mould (for the first few days), Beware salt, on metal frames, is rather corrosive and can lead to oxidation of ’ ’ aluminum and metal parts attached to the wall (What hooks, Tabib, nails, etc.).
The salt content of soda and table salt makes however the wall even more hygroscopic and it facilitates the condensation water (in the long term it creates more harm than benefits) so it is advisable to use it occasionally.

2) Mould all lavender essential oil ’

100 ml of alcohol fuel
15 drops of lavender essential oil

The two ingredients together and apply them on the points to be treated with a spray, leaving act as much as possible. Remove the mold with the aid of a ’ cleaning brush. Diffusing lavender essential oil with an essence burner helps prevent the formation of mould.

L l ’ ’ alcohol and essential oil of Lavender helps to slow the formation of mold and help to delete it, especially if the problem is still not very extended; works pretty well in poorly porous surfaces such as bathroom tiles, the shower curtain and the cabin.
And’ a perfumed solution for a few days but beware intoxicating effects of alcohol ’, evaporating, will be able to 'turn head’ in all directions.

3) Anti-mold Tea Tree Oil

100 ml white wine vinegar
15 drops of Tea Tree Oil

The Tea Tree Oil, or Tea Tree essential oil, is among the most powerful natural mould. Can also be applied pure, in a few drops, to treat localized areas where mold is already present. In order to spray larger surfaces, try it to dell ’ that white wine vinegar is another ingredient from anti-mould properties. Has the advantage of making the environments with fresh smell for a few days, but all ’ start the strong smell of vinegar will not be pleasant for all.

4) The baking mould

50 grams of sodium bicarbonate
10 drops of Tea Tree Oil
1 teaspoon of detergent
Water

Together with baking the detergent and the Tea Tree Oil. Pour ingredients in a bowl and add water little by little, until a creamy paste, easily applied with the sponge.
The result is a slightly grainy cleaning paste that you can use to rub resistant surfaces Home, to remove mold. The advice is to pre-treat the surfaces by spraying of ’ vinegar and leaving act as much as possible, then rinse and then rub with cleansing paste with baking.
This solution requires more treatment hands and leaves the strong smell of acetro and Tea Tree Oil (rather unpleasant) for a few days.

5) Mould all ’ Grapefruit seed extract

2 teaspoons Grapefruit seed extract
2 teaspoons of Tea Tree essential oil
500 d ’ ml tap water

L ’ Grapefruit seed extract is an extraordinary natural bactericidal and antimould, that is boosted in their action if associated with Tea Tree Oil. Pour all ingredients in a ’ water bottle d, (preferably with spray). Shake before use and ’ applied on the surfaces to be treated. Leave as much as possible and then rub with a rough cloth and moistened to make mold removal.

termocBanner

6) Mould with essential oils

100 ml white wine vinegar
100 ml of tap water
10 drops of lavender essential oil
10 drops of Tea Tree Oil
5 drops of lemon essential oil

This powerful blend of essential oils will facilitate the removal and disappearance of mould. The product is also useful to prevent the formation. It can be used occasionally to clean most critical points, particularly resistant surfaces of the bath and the shower curtains.
Combine all ingredients in a spray and shake well before use ’.

7) Anti-mold scented

200 ml of tap water
200 ml cider vinegar
15 drops of essential oils of manuka honey
10 drops of essential oil of cinnamon

The Tea Tree Oil, as mentioned above, It is very effective against mildew, but unfortunately a very strong smell, that not everyone like. For this you can replace it with dell ’ and manuka essential oil of cinnamon, which have antifungal properties and a perfume nicer. Use the ’ apple cider vinegar instead of white wine vinegar ’ can curb odors. Mix the ingredients, pour into a spray and agitate before use ’.

8) IgroDry l ’ excellent mould

In the face of all these remedies just listed, Some are difficult to prepare if you don't have the right components, others are of unpleasant odor, others are ineffective, then c is IgroDry ’ who works in a natural way in mold removal.
In practice, you don't go to devastate vital State of mould with aggressive substances, but you go to create the most hostile environment ’ and durable in order not to let it rise, develop and procreate.
In a simile agricola, you don't go to poison the ’ grass to die (but then slowly ricrescerà), but you go to make sterile growth medium because water free.
Have you ever seen the ’ grass grow in a desert?
This is what makes IgroDry; does not put poisons, does not create acid or alkaline environments but only makes them inhospitable to such microorganism.

Its effectiveness is very evident already from the first application and duration is very, much longer than any other product on the market made from chlorine and all thermal coatings available today.
Apply directly over the painting on the infested area from the mold of sbordando 20 cm over the stain.
The product, being colorless, does not leave haze and returns the original state of the paint color (except for damages that the same mold has already created eroding painting and’plaster shallowest).

N. (B). To prevent the transport of brush mold on clean areas (staining the wall), It is always advisable to remove the bulk mold beforehand using a sponge moistened with water and SOAP or hydrogen peroxide then apply only after IgroDry with one or more consecutive hands after a few minutes.
The product dries immediately and the work is completed in a short time without the need for protections, masks or have odors dispersed throughout the House.
More information is available in This page.

 

tastoID SchedaID InfoID NotizieID

IDShopM

 

 

Share
Share